ALadrs Resin 3D Printer Flex Building Plate,5.31x3.15inch Spring Steel Flexible Plate and Magnetic Base Platform for Anycubic Photon Mono, Mono 4K LCD/DLP Resin 3D Printer 135x80mm 2pcs

Applicable model:135x80mm is Suitable for Anycubic Photon，Photon S，Photon Mono,Photon Mono SE,Photon Mono Ultra,Qidi Shadow 5.5S.And any another resin 3D printer with a printing platform size of 135x80mm, High durability:Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results. Easy to operate: Traditional DLP light-curing printer platforms must use tools to disassemble, while this resin flexible board can be disassembled by bending. Easier removal of printed models from the resin build surface. Makes it easier to remove prints and avoid damage in the process, especially for small prints. Clever design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform. Installation method: Thoroughly clean and dry the printing platform plate, attach the magnet to the printing platform plate and let it sit for a while to fully seat it, install the spring steel plate on the magnetic base again, and finally reset and level the printer. Set to start printing. It is recommended to print (A4) 3.8mm thick spacers to facilitate the normal zeroing of the Z axis.