IPCamPower POE Combiner Splitter Adapter, Run 2 IP Cameras on 1 Cable

Allows you to run 1 cable run to the switch for 2 cameras that are near each other, saving on time and material costs. Set consists of a sender "Combiner" unit and a receiver "Splitter" unit. Plug Combiner unit into 2 open ports on your POE switch or POE NVR. Run one long cable to the location that has the cameras that are nearby each other and plug it into the Splitter. Connect 2 short cables to the Splitter unit and connect the other ends to your camera. Done! Reduces cabling costs. Let's say you are installing 2 cameras on each side of a corner. Instead of running 2 cables back to the switch or NVR, you can now just run 1. Works great for both new and existing installs. Easy and Cost Effective. Ever installed a camera in a location, only to find out a few days later that you need another camera right by it? What's worse, the switch is on the other side of the building and it took you hours to run that one long cable run. No worries! Just use this splitter set to make your installation much easier and avoid running another long cable. The Splitter Unit comes with weatherproof RJ45 connectors, allowing you to fully expose the Receiver unit to the weather elements. Full IP68 Rating gives this unit the ultimate weather protection and can directly be exposed to rain, sleet, snow, ice, and the sun. Simple plug n play installation. Works with all standard 802.3af/at POE switches and POE NVRs that use standard active POE. Works on most all brands POE Switches, Cameras and POE NVRs. Don't be fooled by other cheaper combiners on the market that only work on POE Switches. IPCamPower's Combiner works on all POE Switches, POE NVRs and POE IP Cameras and supports both Mode A and B POE making it the most flexible and compatible POE Combiner/Splitter on the market.