Jrifedptry Smart Home ZigBee 3.0 Wired Gateway Hub RJ45 Ethernet Bridge TASMOTA MQTT Firmware for MQTT Home Assistant Zigbee2MQTT

FAQ 1: The device indicator light is not on - If the wrong device template is modified. As a result, the device light does not light up. You can directly and hold the button for more than 50 seconds to reset the gateway. Firmware upgrade address: https://github.com/xsp1989/ZB-GW03_firmware/tree/master/tasmota Official website documentation: https://tasmota.github.io/docs/Serial-to--Bridge/#additional-resources Set the serial port to transparent transmission (Zigbee2MQTT) FAQ 2: Reset tasmota gateway - 1. Completely disconnect power from the device for . 2. Turn the device on and off 6 times at intervals of less than 10 seconds and keep it on after the 7th time. 3. Official documentation: https://tasmota.github.io/docs/Device-Recovery/#fast-power-cycle-device-recovery