Polymaker Fiberon PA612-CF Carbon Fiber Nylon Filament 1.75 Black 500g, Enhanced Hard Edge Cardboard Spool, Fiberon PA612-CF Strong & Low Moisture Sensitive Nylon 1.75mm 3D Printing Filament

【Fiberon by Polymaker】- A new product family of Polymaker dedicated to democratize high-performance composite materials. It offers cost-effective composite 3D printing filament especially optimized for high-speed printing. With superior printability and high printer compatibility, it enables high-performance parts on most mainstream printers, including entry-level printers 【Strong & Low Moisture Sensitive】 - Polymaker Fiberon PA612-CF Nylon filament is a carbon fiber reinforced 3D printer filament. It has lower moisture sensitivity compared to PA6/66 and PA6-based materials, and better mechanical properties than PA12-based materials. It has very excellent printability, good first layer adhesion, no jam, no warping, and no distortion 【Wide Application】 - Fiberon PA612-CF filament 1.75mm has excellent mechanical and thermal properties as well as good size stability. It offers huge potential to industrial and engineering tooling, automotive, and end-use applications. And it has a wide printing temperature range, making it printable on most consumer printers 【Tangle Free & Resealable Bag】 - Fiberon PA612-CF nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use 【Cardboard Spool with Enhanced Hard Edge】 - Fiberon filament comes in upgraded packaging, featuring an enhanced coating on the edge and a fully recycled cardboard spool and box. The hard edge not only prevents the dust from fraying cardboard but also protects the edge from deformation and delamination 【Printing Settings】 - Nozzle: 250-300˚C; Bed: 40-50˚C; Speed: Up to 300mm/s 【Note】 - It is important to have an abrasion resistant nozzle since there is carbon fiber inside this Nylon filament. It is suggested to use metal coated brass nozzle when printing PA612-CF on desktop 3D printers