Polymaker PA6-GF Nylon 1.75mm Grey, 2kg Glass Fiber Nylon - Warp Free 3D Printer Filament

【Stiff & Strong & Heat Resistant Nylon Filament】 - Polymaker PolyMide PA6-GF nylon filament 1.75mm is glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion 【Wide Application】 - PolyMide PA6-GF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, drone frame, prosthetics or handles 【Tangle ************************************************************* & Resealable Bag】 - Our glass fiber filled nylon filament 1.75 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue ️ 【Printing Setting】 - Nozzle: 280-300 ˚C; Bed Temperature: 25-50 ˚C (Do NOT exceed 50 ˚C); Speed: 30mm/s - 60mm/s; Annealing: 80℃ 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model); Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA ️ 【Note】It is important to have an abrasion resistant nozzle since there is 25% glass fiber inside this Nylon filament. PolyMide PA6-GF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints or so.