Radiolink RC6GS V3 7 Channels RC Transmitter and Waterproof Gyro Receiver R7FG, 30 Models Storage 2.4Ghz Voltage Telemetry, Surface Remote Radio Controller for RC Crawler, Drifting, Bash,Car and Boat

【Anti-interference & Stable 600M Control Distance】2.4GHz rc transmitter receiver kit, FHSS spread spectrum & 67 channels ensures strong radio interference safety on competitions. Support over 30 of RC6GS V3 working in the same area without any interference. 【7 Channels & Dual Programmable Mix Control】7 Channels rc transmitter is designed for all types rc cars and boats like Crawler/Tank/Bash/Tank/Robot etc. Arbitrary 2 channels can be easily set as mix control and supports one switch to ON/OFF it. This allows the operation of a vehicle with two engines (like tank) to be realized. 【7 Channels Dual Antenna Gyro Receiver R7FG】Waterproof RC Receiver R7FG BUILT-IN GYRO makes the vehicle turns more smoothly, and drifting from high speed can be prevented, 12ms Fast Response, the gyro sensitivity can be adjusted by the VR switch, which fits for drifting car and on-road cars. 【30 Models Storage & 10 ID SEED function & Cruise Control】With 30 models storage and each model can be set up set low voltage and low RSSI value alarm separately. ID SEED function support assign one of vehicle running when they are power on, which meet needs like long-distance rescue with model cars/boats 【Multi Function RC Transmitter Kit】Voltage telemetry, EPA, ABS, STEXP, STSPD, SUB-TRIM, IDLUP, fail-safe, dual-rate, timer, cruise control, FPV head tracking, low power alarming etc. CH3-CH5 can be customized to VR and tact switch. 【Vehicle's Voltage Telemetry】Real-time information telemetry on RC6GS V3 radio screen, like the vehicle's battery voltage, RSSI, etc. NOTE: To support the telemetry function, the model must be equipped with a telemetry receiver R7FG/R8FG/R8FGH. 【DUAL-RATE SWITCH】Dual rate function support one switch to change different servo travel, like channel 2 throttle servo travel can be switched to 50% or 100% by SWD or SWA button. RC6GS V3 can work with R7FG/R6FG/R6F/R4FGM/R8FG/R8FGH/R12F/R16F receivers., Manufacturer: Radiolink