Agwuoetr 2.4Ghz Mini Remote Control Built-In Lithium Battery With Receiver, Suitable For Electric Skateboard Longboard

3). and hold on the bind button on the remote and then turn the remote on; 5).Once you see a solid red light, you now know the two are binded together,and please pull the bind plug out (this is important,so the remote can record the throttle mid to realize the fail safe) 4).You should notice the transimitter go from flashing red to solid red,and also the solid red of the receiver; How to bind the transmitter to the receiver? 1).Check and make sure all the wires are mounted,and the remote is CLOSED,insert the bind plug into CH3(Bind) on the receiver;2).Switch on the ESC,you can see the receiver red light flash; 6).Then you can test it again by turning off the controller and it should if you turn the power on Transmitter back on it should go back to solid red.Before running,it's better to test the fail safe fuction by closing the remote,if the motor didn't move,so the fail safe fuction is in good condition,when you find the motor is moving,you have to repeat No.1- No.6 above