Airflow iCON Plug-in Humidity and Timer Module - HTM - for iCON 15, iCON 30 & iCON 60 Extractor Fan - 3 Years Warranty

Compatible with iCON 15, 30 & 60 Fans - Designed for seamless integration with the full Icon fan range. Easily upgrade or replace without changing the entire fan unit. Adjustable Run-On Timer (2-45 Minutes) - Keeps the fan running after switch-off to clear moisture and odors. Factory pre-set to approx. 15 minutes, adjustable using the included tool. Humidity Sensor (40-90% RH) - Automatically activates the fan when humidity rises. Factory pre-set to approx. 70% RH. Adjust sensitivity using the supplied adjustment tool. Pull Cord Activation with Timer Control - When installed in an iCON fan, the module allows manual activation via the integrated pull cord. Once triggered, the fan runs according to the adjustable timer settings (2-45 minutes). This module supports two activation methods: humidity sensing and pull cord activation. Recommended Humidity Settings for UK Climate - UK indoor humidity often ranges between 70-90% RH. Setting the module to 40% RH may cause the fan to run continuously. If the fan takes too long to switch off, adjust the humidity setting closer to 70-90% RH for better performance. Pull Cord Activation and Timer Reset - Pulling the cord switches the fan on for the set timer duration (2-45 minutes). If pulled again while the fan is already running, it won’t turn the fan off-it simply resets the timer, starting the countdown again from your chosen setting., Manufacturer: Airflow