ALadrs Resin 3D Printer Flex Building Plate,7.95x5.04inch Spring Steel Flexible Plate and Magnetic Base Platform for Elegoo Saturn S, Anycubic Photon Mono X, Mono X 6K/ 6KS, M3 Plus 202x128mm 2pcs

Applicable model:Suitable for Photon X, Photon Mono X,Photon Mono X 6K, Photon Mono X 6KS,M3 Plus, Saturn S，Smart Kumitsu KL9，Photon Mono X2.202x128mm Resin Magnetic Flexible Steel Plate Flex Bed is suitable for any resin 3D printer with a printing platform size of 202x128mm, High durability:Flexible steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print. At the same time, after installing the magnetic printing platform, you will need to re-leveling the 3D printer for excellent printing results. Easy to operate: Traditional DLP light-curing printer platforms must use tools to disassemble, while this resin flexible board can be disassembled by bending. Easier removal of printed models from the resin build surface. Makes it easier to remove prints and avoid damage in the process, especially for small prints. Clever design: The magnetic printing platform is equipped with a handle that makes it easy to install and remove the magnetic printing platform. Installation method: Thoroughly clean and dry the printing platform plate, attach the magnet to the printing platform plate and let it sit for a while to fully seat it, install the spring steel plate on the magnetic base again, and finally reset and level the printer. Set to start printing. It is recommended to print (A4) 3.8mm thick spacers to facilitate the normal zeroing of the Z axis.