AOKO M.2 Duplicator SATA to NVMe SSD Cloner Docking Staion for NVMe + M.2 NGFF and 2.5" /3.5" SATA SSD/HDD Converter and Reader Bidirectional Offline Hard Drive Cloner

AOKO M.2 NVMe/SATA Duplicator Compatible with M.2 NVMe/M.2 SATA and 2.5''/3.5 '' SATA SSD/HDD，Can install one NVMe or SATA SSD/HDD separately or install both NVMe and SATA simultaneously for reading, writing,and cloning. Ideal for data backup, upgrading system hard drives, or replacing old hard drives.Clone your SSD/HDD in Multiple Combinations; Use as a Data recovery tool to access drives AOKO Hard Drive Cloner Supports NVMe and 2.5” /3.5” SATA + M.2 SATA SSD Two-Way offline cloning .⚠ Note: Supports only NVMe to SATA and SATA to NVMe cloning. SATA→SATA and NVMe→NVMe cloning are not supported Wide Compatibility of Hard Drive Reader: Compatible with PCIe/NVMe and SATA NGFF M key（B+M key）SSD of Sizes 2230/ 2242/2260/2280/22110 and SATA 2.5''/3.5'' HDD/SSD. M.2 PCIe AHCI & IDE & Optical Driver Not Support This M.2 Duplicator made of All-Aluminum material + Vertical in-line design. There is no size limitation. It can quickly dissipate heat (Note: the temperature of the hard disk may be as high as 60° when working, please do not touch it with your hands) The AOKO SSD Cloner is so easy to use without any tools and no driver required, The status indicator makes the working status clear and clear, silicone gasket to prevent shifting and abrasion. Comes with USB 3.1 Gen2 data cable (C to A Cable) and 12V-3A Power Adapter !!!When cloning, please ensure that the capacity of the target drive is greater than that of the source drive, and do not connect to the computer during cloning!!!