Automatic Winding Machine,Coil Winder Machine with Auto-Wire Alignment,for Tube Transformer, Enameled Wire, Solder Wire

*Automatic wire arranging and winding machine, capable of winding coils, tapes, threads, and fishing lines with a 4mm thick steel base, ready to use upon hand. The slide table precision is 0.01mm, and the winding diameter is 0.02mm-1.0mm. *The main motor has a torque of 2.3nm, supports a spool diameter of 15cm, and a left and right cable width of 10cm. By inputting parameters, the program intelligently realizes coarse and fine adjustments. The speed can be adjusted and the winding direction can be adjusted. The winding can be paused at any time, and the winding parameters are automatically saved. *Set as many circles as needed, specify the number and length of each layer, and don't worry about the rest. The program calculates everything, such as a total of 1000 circles, 100 circles per layer, and 40mm per layer, *The left and right buttons can flip to different functional pages, and the up and down buttons can adjust the values of the corresponding functional pages. After adjustment, it will be automatically saved in real time.Press the start button again to pause, press and hold for 5 seconds to clear the current set of coil completion values, and restart from 0. *After turning on the machine with absolute zero and relative zero, the wiring harness defaults to searching for absolute zero to the left, so the infrared locator must be placed on the left side of the wiring harness. Otherwise, it may lead to errors., Manufacturer: STIDEsknautic