AUTOOL OBD2 Breakout Box OBDII Protocol Detector for Monitoring Signals of Protocol/Power/Grounds，CAN Test Box Fault Diagnosis Scan Tool for All OBDII Vehicle

【16 Pins Design】The input jack layout of OBD2 protocol detector fully simulates the 16-pin layout of the OBDII interface, allowing more tests to be performed quickly and intuitively. When the OBD2 scanner communicates with vehicles, all 16 pins of OBDII breakout box can be easily connected. 【Data Transmission】Built-in input jacks allow connection of any type of 4mm banana plug. Each output port can be connected to a different device, such as an on-board diagnostic tool, a car recorder, a navigation device, and so on. These devices can read the vehicle's data through the output interface and analyze or control the vehicle accordingly. 【CAN Bus/K-line/L-line/PWM Protocol Line】OBD2 breakout box not only can detect car signal but also can detect some of diesel signal such as K-line, L-line, CAN bus and PWM protocol line. 【Colored jumper cable】Equipped with 4 sets of universal wire jumper,it supports connecting multiple diagnostic devices at the same time and can be wired flexibly. You can use it to diagnose or program to diagnose which is convenient for the professional engineers to detect and maintain. Note: Do not use jumper cables to short between the input jacks of this product when unsure of the electrical wiring on the vehicle. 【Three Years Warranty】For any quality problems. If OBD2 Breakout Box has any defect, we will provide new replacement or solutions for our customers until satisfaction without delay, and provides lifetime technical support. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.