biancoGarden Grigio Antracite (Anthracite Grey) Chalk Paint for Outdoor Use (1 Litre) - Recolour Your Garden & Conservatory without Sanding or Finishing

PROFESSIONAL EXTERIOR CHALK PAINT - NO FINISH REQUIRED. Application: degrease and dust the surface and paint. After one week, clean easily with a sponge and clean water. biancoGarden is ready to use, does not require sanding of surfaces: see instructions. EXTRA-RESISTANT formula for coloring ALL EXTERNAL SURFACES. biancoGarden is ideal for wood, iron, plastic, cement, stone, garden furniture, fences, gates, railings, and pallets INSTRUCTIONS: on glossy surfaces, dull with abrasive sponge. Remove dust, non-adherent paints, and greasy substances. On porous walls, apply a coat of fixative first. Mix thoroughly and apply with a roller or brush. Give two coats 24 hours apart. The product dries on the surface in 1 hour at 20°C but wait 24 hours for subsequent coats. Apply between +10°C and +30°C, dilute with a maximum of 5% clean water. Wash your tools with hot water and mild soap WARNINGS: Do not apply at temperatures below 5°C or above 35°C. Do not apply to surfaces heated by the sun. Do not apply in case of rain, and protect the painted surface from rain for the first 24 hours. Store the product tightly closed, away from sunlight and frost, with a maximum duration of approximately 6 months. KEEP OUT OF REACH OF CHILDREN On rusty iron, remove large rust with a brush and apply the biancoShabby rust converter first, wait 48 hours before painting. On chromed metals or new zinc-plated sheet metal, sand first with 220-grit sandpaper to satin the surface and degrease with alcohol. On surfaces exposed to grease, such as a table top, apply two coats of exterior protective coating to prevent absorption, and remove any spills of oil, wine, and coffee as soon as possible IMPORTANT: biancoGarden REACHES ITS FINAL STRENGTH AFTER 5 DAYS. BEFORE 5 DAYS, AVOID TESTING THE RESISTANCE OR STAINING THE SURFACES. ECOLOGICAL PRODUCT based on water, NON TOXIC, Manufacturer: BIANCO SHABBY