C6 white box outlet - Box outlet for boot - Cantilever guide square 4-sided 6 mm diameter - Steel joint for blinds and roller shutters. Made in France

4-panel square box outlet of 6: The box outlet is a central part in the operation of a roller shutter mechanism as it allows you to transmit between the crank and the roller shutter winch, so that the shutter can rise and down. This white C6 model fits winches with a square outlet, not hexagonal. Installation Tips: To replace your damaged box outlet easily, you must first open the PVC boot of the shutter to remove the already in place. Take your new outlet and check that its stem matches the length of the old one, if necessary, you can cut it if it is too long. After that, you only need to put the outlet in the boot by running the axle through the winch, close the boot and screw the fixing screws. ✅ Offset & Angle Capacity: This mini angled joint guide block to offset the pole by 43 mm, allowing you to open the window largely. The box output also has a 30 degree angle capacity. ✅ Durable and discreet: Thanks to the robust steel of the shaft, the 4-sided hexagonal box outlet lasts for a long time. It is also a robust and high-quality product made in France. It can last many shutters training for several years Technical information: This box outlet comes in a bag consisting of a rod with a diameter of 6 mm and 16 mm long, a joint joint (female inlet diameter 12 mm), a sealing sleeve, 3 mounting screws, 1 screw for mounting on a crank with a protective seal., Manufacturer: Zurflüh-Feller