DIY Electric Skateboard ESC Kit, 36V Electric Skateboard Remote Control, Wireless Remote Controller with LED Indicator for Electric Skateboard Accessory Replacement, Single Drive Controller 35KM/H

10S 36V SINGLE DRIVE ESC SPECIFICATION: Rated Voltage: 36V; Current: 12A; Power: 430W (36V); Rotate Speed: 3000rpm; Max Speed: 35km/h; Drive Mode: FOC; Sensing Mode: Hall; Max Load Bearing: 120kg. The electric skateboard speed controller comes with a portable controller, 4 different speed modes: high speed sport mode, high speed economy mode, middle speed mode, low speed mode. SKATEBOARD REMOTE CONTROLLER WITH A INDICATOR: This electric longboard skateboard control system has EMP control module with remote module, it can do as ESC do. ESC electric skateboard controller with remote receiver module, so it supports remote control. The electric skateboard ESC kit has a indicator that displays signal status, speed modes, battery percentage. MULTIPLE PROTECTIONS: Wireless controller is mde of high quality chip and electronic components, the solid structure of mainboard can greatly lengthen the service life. Single drive design can offer excellent and stable performance. This diy skateboard kit electric is easier to use, has overvoltage, undervoltage, overheat, stall, CW/CCW, overcurrent protection, speed control, safe and to use. HOW TO PAIR: ① Connect the main controller to a power source. ②Power on, then press and hold the key for about 6 seconds. Wait until the switch light flashes. ③Turn on the remote control switch, and use a small screwdriver to press the button in the small hole in the lower left corner of the remote control. ④ The remote control turns off for two seconds and then turns on again. ⑤ Tthe remote control and the switch signal light to flash at the same time, matching is successful! ELECTRIC FOUR WHEEL SCOOTER CONTROLLER: Package includes 1 Control; 1 Remote control transmitter; 1 LED battery indicator; 1 Switch; 1 USB cable. The electric skateboard ESC kit is easy to install. The well-organized circuit board is easy to install, but needs professional skills. You can contact our customer service if you have any questions about the skateboard controller.