Epindon TMR Electromagnetic Replacement Stick Module Compatible with Victrix Pro BFG Controllers | Tactile Switch | Conductive Rubber is NOT Required | Both PS5 & Xbox Version | 2-PACK 80G

Fix Stick Drift & Conductive Rubber issues. The left or right stick modules of the Victrix Pro BFG controllers can be replaced if drift or conductive rubber failure occurs.No conductive rubber is required - eliminates wear-related issues permanently. Next-Gen TMR Electromagnetic Module. the TMR stick module for increased durability. In addition, the tactile switch is easy to press and feels good to press. In particular, it has a shorter response time, which is an essential feature for FPS professional gamers. Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon TMR hall effect electromagnetic modules.【Attention : 】please insert and remove connector pins of left stick module slowly. Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration. 【TIPS】: Always place the VICTRIX PRO BFG controller on a flat, level surface when performing reset/calibration. Multiple reset attempts may be required., Platforms: PlayStation 5, ESRB Rating: Everyone 10+