GeZu Impex® Adjustable Post Support 80 x 80 mm Hot Dip Galvanised height adjust holder elevated base

PRODUCT - Post supports are very practical and widely used in garden and timber construction projects. The hexagon nut is welded to the support plate, ensuring stability, and the welded joint firmly fixes the plate in place. FEATURES - The Adjustable Bolt Down Post Support can be attached to a level concrete or wooden floor using 4 holes, each with a diameter of 13 mm, or secured with bolt anchors. USABILITY - If the foundation height is uneven, the post support can be adjusted from 50 - 480 mm before final installation. The 500 mm long threaded rod allows for height adjustment and serves as a mandrel that screws into or out of the post for precise alignment. VERSATILITY - For stability, approximately 10 - 20 mm of the adjustment range must be reserved for thread security. The hot-dip galvanisation ensures that the post support is well-protected against weather conditions. The base plate measures 160 × 100 mm, while the support plate is 100 × 100 mm. TECHNICAL DATA - Adjustment range: 50 - 130 mm - Support plate: 80 x 80 mm - Support plate material thickness: 6 mm - Support plate holes: 4 holes Ø 13 mm - Support plate hole spacing: 50 mm - Base plate: 100 x 100 mm - Base plate material thickness: 8 mm - Base plate holes: 4 holes Ø 13 mm - Base plate hole spacing: 70 mm - Ø Mandrel/thread: 24 mm - Hexagon nut: AF 36 - Material type: Hot-dip galvanized steel