GeZu Impex Adjustable Post Support 80 x 80 mm Zinc Flake height adjust holder elevated base

PRODUCT - Post supports are height adjustable even after installation, thanks to the C-shaped 6 mm thick support plate. These post supports are very practical for horticulture or general construction with wooden posts. FEATURES - The Adjustable Bolt Down Post Support can be screwed to a level concrete or wooden floor using 4 holes, each with a diameter of 13 mm, or anchored using bolt anchors. USABILITY - If the foundation is uneven, the post support can be adjusted within a range of 60 - 130 mm using the movable support plate and its locking nut, even after installation. The 150 mm long threaded rod enables both the height adjustment function and the function of a mandrel that is screwed into or out of the post when adjusting the height. VERSATILITY - For stability reasons, approx. 10 - 20 mm of the adjustment range is required as thread security. Thanks to the galvanisation, the adjustable post support is optimally protected against external weather influences. The base plate measures 100 × 100 mm, and the support plate measures 80 × 80 mm. TECHNICAL DATA - Adjustment range: 50 - 150 mm - Support plate: 80 x 80 mm - Material thickness of support plate: 6 mm - Base plate: 100 x 100 mm - Material thickness of base plate: 8 mm - Holes in support plate: 4 holes Ø 13 mm - Holes in base plate: 4 holes Ø 14 mm - Hexagon nut: AF 36 - Material type: Zinc flake-coated steel