GL.iNet GL-A1300 (Slate Plus) Wireless VPN Encrypted Travel Router- Easy to Setup, Connect to Hotel WiFi & Captive Portal, Phone Tethering, Range Extender, Assess Point, Pocket-Sized, Open Source, NAS

【DUAL BAND AC WIRELESS ROUTER】 Dual band network with wireless speed 400Mbps(2.4G)+867Mbps(5G), Tethering Compatible. A highly stable and powerful IPQ4018 @717MHz CPU. PACKAGE CONTENTS: GL-A1300 (Slate Plus) router with 1-year limited warranty, power adapter (UK Plug), Ethernet cable and user manual. 【OPEN SOURCE & PROGRAMMABLE】 Slate Plus runs on the latest OpenWrt 21.02 operating system and significantly reduced signal interference. You can customize the router and install applications based on your preferences. 【VPN CLIENT & SERVER】 OpenVPN and WireGuard pre-installed, compatible with 30+ VPN service providers. Max. VPN speed of 28 Mbps (OpenVPN); 190 Mbps (WireGuard) 【NETWORK STORAGE】Our network storage feature supports SAMBA and WebDav protocols. By plugging an external USB hard drive into the router, you can create a private network storage to store and share your documents. 【CAN BE WIDELY USED】 No matter you are at hotel, café, airport, restaurant, RV or other places, you could connect the router to the public WiFi hotspot and secure your connected devices. It is small and light, 118 x 84 x 33 mm (L*W*H) / 429g, which is very convenient to carry around while working or travelling. 【VPN INTERNET KILL SWITCH】 This is a countermeasure concept of activating a single shut off mechanism for all Internet traffic. If this feature is enabled, the router needs to run the a VPN client(OpenVPN or WireGuard) all the time, if any of the VPN client isn't running, the devices connected to the router are Not Allowed to access the Internet. 【VPN POLICIES】You can define VPN routing policies, it is possible to use VPN for a specific website/IP while maintaining a normal Internet traffic without VPN for others. 【Enable VPN or AdGuard Home Easily】Immediately enable/disable your selected feature(AdGuard Home or OpenVPN Client or WireGuard Client) through the physical toggle switch. ***The default setting of the button is NO Function, you need to set it in the admin panel before using this function.***