Marcrist Diamond Core Drill Adaptor, SDS Plus to 1/2 inch BSP (M) Thread | Tool steel machined to 0.25 mm precision, internal taper takes a pilot bit, corrosion and rust resistant

RUN DIAMOND CORE BITS FROM AN SDS PLUS MACHINE: Push the shank into the chuck of an SDS plus drill or rotary hammer, then screw on a dry diamond core bit with a 1/2 inch BSP female thread to cut holes for pipes, cables and ducting. INTERNAL TAPER FOR A PILOT DRILL: A tapered seat inside the adaptor holds a taper shank pilot drill, sold separately, so the core starts on your mark. The hole through the side lets you tap the pilot drill back out with a drift key. TOOL STEEL, MACHINED TO 0.25 MM: Marcrist machines these adaptors from high quality tool steel to a precision of 0.25 mm, so the core runs true. Runout and vibration in the adaptor slow the cut and shorten the life of a diamond core. MINIMISED VIBRATION, CORROSION RESISTANT: Precision engineered to run concentrically for less vibration through the machine, and corrosion and rust resistant, so the thread and shank stay clean in the van and on site. FITS 1/2 INCH BSP DRY CORE BITS: Works with Marcrist cores such as the DCU650 and DCU750X, plus other dry core bits with a matching female thread. Not for 1 1/4 inch UNC cores. Recommended for installers, building professionals and electricians.