AP Supplies MDPE Reducing Tee 25mm x 20mm x 25mm, PN10 | Reducing compression tee: 25mm MDPE pipe run with a 20mm branch. PN10 rated, up to 10 bar (145 psi)

Will it fit my pipe: The two in-line ends take 25mm MDPE pipe and the branch takes 20mm MDPE pipe. Check your pipe sizes before ordering What does it do: A reducing tee that splits a 25mm run and steps down to a 20mm branch at 90 degrees What pressure can it take: PN10 rated: designed for a maximum pressure of 10 bar (about 1 MPa or 145 psi), so it suits water supply and irrigation runs What is it made from: MDPE (medium-density polyethylene) is durable and flexible, with good resistance to chemicals and corrosion, and withstands harsh weather and temperature variations How do I fit it: Threaded compression connections are easy to install and need no specialist equipment; cut the pipe square and tighten the nut to seal the joint. In the box: 1 x reducing tee (120g)