Mirror Cutter Tool Heavy Duty for Thick Glass - Cut Mirrors and Glass Without Breaking, 2 in 1 Cutting Tool Inc Oil and Instructions How to Cut Mirror with Online Videos for Beginner and Professional

MIRROR CUTTER - Watch Mirror Cutting Videos Read Tips And Instructions and Download User Guide. Must Soak Mirror Cutting Tool Wheel in Glass Cutting Oil, Run Wheel Up And Down A Board To Check Wheel is Spinning Freely So It Can Score Mirror Evenly If Mirror Cutting Blade Stops It Will Not Score. Mirror Cutter Wheel Must Be Oiled Every Cut, A Dry Wheel Will Stick and Drag Across And That Will Not Make a Good Score. Practice On Scrap Mirror Before Making Final Cut To Ensure You Have The Technique. HOLD MIRROR CUTTING TOOL - Handles Of Mirror Cutter Tool Are Only For Squeezing Mirror To Break Do Not Hold Glass Cutter by Handles When Scoring. Hold Close To The Wheel for Control And Pressure on Mirror Scorer, The Technique is to Create A Small V In Surface Of The Mirror. Scoring Too Deep Or Without Oil Will Leave A Wide Groove And White Dusty Line that Will Not Break On The Line Instead Of A Shallow V, Perfect Mirror Score Must Be Just Firm Enough To Leave the V Score in The Glass Mirror. CUT STRAIGHT LINE IN MIRROR - Place Mirror Sheet On Board At Waist Height, Scoring Mirror on Soft Carpet Can Cause Hairline Cracks when You Go to Break Mirror. Score Front of Mirror And Only Once or It May Shatter. Draw Line On Mirror With Marker, Follow Line By Pulling Cutter Towards You Never Away, Watch Back Of The Mirror Cutting Wheel to Follow Line or Use Flat Side Of Glass Mirror Cutting Blade To Run Along A Very Smooth Straight Edge Guide At Least 2mm Thick, Tape Guide To Prevent Moving. CUT CURVES IN MIRROR - And Wavy Lines Over Quarter Circle If Mirror Tool Is Held Correctly And Instructions Followed. Draw Shape On Mirror And Follow Line With Mirror Cutting Tool. The Mirror Cutters Tool Must Be Held Upright And Perpendicular, Lean It Over And It May Slide Sideways And Glass Mirror Cutter May Not Cut V In The Mirror Glass Surface. Smooth Curves Are Ok With The Mirror Cutting Tool, Sharp Angles Are Not. Large Curves May Need Squeezing The Score On Mirror Gently From Both Sides. BREAKING MIRROR - Align Aluminum Breaker Of Glass Cutter Dead Center Over Score Line, Lift Mirror And Squeeze Handles Ever So Gently. Over Squeezing Can Chip Edges Of Mirror. Large Mirror Sheet Use Piece Of Wood Under The Score Line And Bend Mirror Over It Or Over Edge Of Bench, Watch Videos For More Info. Trimming Edge Of Mirror Is Possible Within Laws Of Physics For Any Glass Cutter. Do Not Try To Cut Less Than 4 Times Thickness Of Glass From Edge, Less May Be Possible Off Edge With Practice., Weight: 0.55 Pounds, Manufacturer: The Amazing Tile And Glass Cutter