Moongiantgo Electric Grain Grinder 150g Spice Superfine Mill Stainless Steel & 28000RPM Commercial Motor, for Herb/Spice/Nut/Cereal, with Protection of Overload & Open-Cover-Stop (Capacity: 150g)

➤ SAFETY LID DESIGN & OVERLOAD PROTECTION - Our electric grinder is equipped with a safety device on the cover, that is if you open the cover during grinding, the machine will stop working immediately to avoid injury. * Besides, if the machine can't start running after turned on, it may be caused by that induction switches inside safety device is not triggered. Please adjust the cover to make sure it's pushed to the end of the two Buckle Structures on the both sides without no space. ➤ STAINLESS STEEL MATERIAL - The whole body is made of high quality stainless steel and meets food safety requirements. Easy to start working only by pressing the power switch. * Recommend use time is no more than 3 minutes. Do not continuously operate the machine, and it takes 5-10 minutes to rest after every 3 minutes of grinding work. If you are not satisfied with the grinding effect, you can sieve out the coarse particles with a mesh screen and grind it again for finer powder. ➤ MULTIPURPOSE GRINDER MILL - Applicable to pulverizing all kinds of dried materials, including grains, spices and herbs, such as rice, soybeans, coffee beans, corn, wheat, salt, pepper, cumin, dried chili, ginseng, sesame... * [NOTE] The material to be ground must be dry enough, no moisture and grease. Please make sure the materials you gonna to grind cover the long blade and no more than 2/3 of the jar to leave the space for blade's turning when grinding. ➤ HOW TO CLEAN & REPLACE THE BLADES - The grinding jar is not detachable, so it CANNOT be cleaned with water directly. You can clean up the remaining powder inside the jar with a cleaning brush and then wipe the inside of jar with a dry cloth. * To remove the blades, Use a screwdriver to hold down the middle screw, and Drive the wrench or sleeve counter-clockwise to loosen the locknut on the blade. ➤ SPECIFICATION - Capacity: 150g/0.33lb; Grinding Degree: 50-300 Mesh; Rotating Speed: 28000R/Min ; Power: 850W. ( * We're so sorry that there are minor scratches and pits cannot be avoided during the production and processing process. Hope dear you can understand : ) [Any questions or needs, contact us any time and we will provide you with quick response and the best help.], Weight: 0.330693393 Pounds, Manufacturer: Moongiantgo