MSI GAMING RTX 3060 TI X 8G LHR NVIDIA GeForce RTX 3060 Ti 8 GB GDDR6

TWIN FROZR 8 offers the perfect balance between cool temperatures and quiet fans during endless gaming sessions A masterpiece of teamwork, fan blades work in pairs to create unprecedented levels of focused air pressure Precision-machined heat pipes ensure max contact and spread heat along the full length of the heatsink Zero Frozr is the calm before the storm, keeping fans still and maintaining silence until cooling is needed Don't sweat it, Airflow Control guides the air to exactly where it needs to be for maximum cooling Thermal pads beneath the sturdy metal backplate provide additional cooling Hardware Installation 1. Turn off the computer and unplug the power cable. Then open your computer case by removing the side panel. Remove any expansion bracket on the back of your case which may obstruct your new graphics card. * If you are replacing a graphics card, make sure to hold the graphics card bracket in place and carefully loosen the screws. Then unplug any supplementary PCIe power connectors on the card and carefully remove the card using the release clip on the PCIe socket on the motherboard. 2. Position the graphics card directly over the empty PCIe slot and press one end of the card into the slot first. Gently but firmly press the other end until it is fully seated in the slot (you will hear a click). Secure the bracket of the graphics card to your case with screws. 3. Connect any additional PCIe 6/8/16-pin power connector. 4. Close your computer case back up and plug in the power cable. Connect the output of your graphics card to your monitor with a display cable.