NONDK -8506 Network Cable Tester Supports Test/IP Scan/Network Port Speed Multifunction Cable Tracker Finding Tool

PS: After testing, customers need to reprocess the whole steps for new port testing to the accuracy of the testing. Reglages: Customers can set language, backlight level, backlight time, auto default setting, about etc. Test de commutateur: After testing, the testing result show the standard of the switch (10M/100M/1000M) and also the duplex mode of the switch. Test : Customers were suggested to set IPV4 for the first time to use test function, after enter the test function customers can use UP/Down button to choose "Set IP" to set the local IP, Subnet Mask, and Gateway, after setting these, customers need to save the settings then can return to use the scan functions. Balayage IP: Using UP/Down button to choose "Set IP" to set the local IP, Subnet Mask, and Gateway, after setting these, customers need to save the settings then can return to use the IP scan functions. Digital Mode: Anti-interference, when tracking cables with load from 1000M switches, customers were suggested use this mode. Analog Mode: With little noise, customers were suggested to use this mode when tracking cables without load. Transmitter: Default set to Digital mode, use UP/Down button to switch between the two modes.