PAMEENCOS 5pcs VL6180 VL6180X Distance Sensor Range Finder Optical Ranging Light Sensor Module Gesture Recognition Development Board I2C Interface 3.3V 5V Emitter Ambient Light Sensor for Arduino

【Working Principle】The VL6180 is a time-of-flight measurement sensor. The sensor consists of a very small laser source and a matching sensor. The VL6180X can detect "time of flight," or the time it takes for the laser to recover the sensor to calculate the distance. 【Applications】The VL6180 module is recommended to handle distances from 5mm to 100mm. Due to the small size of the sensor module, it is easy to use in any robot or interactive project. You can use it with any 3-5V power supply or logic microcontroller. 【Features】Integrated intelligent optical module, can be used for proximity sensing, ranging and other functions; Fast and accurate distance measurement. Measure absolute range from 0 to more than 100mm. Based on measurements of spontaneous beam reflection independent of the object, measurements over a range of 100 mm can be used in some extremely desirable target reflectance and environments, but are not guaranteed; 12C interface for device control and data, two programmable GPI0. 【12C Communication Pin】The SCL-12C clock pin is connected to the SCL of the main control; Sda-12c data pin, connect to the master SDA. 【Control Pin】GPI0 - The pin used by the sensor to indicate data readiness, note that the pin output is 0-2.8V high and low level, the pin may not be applied to Arduino and other boards (these boards are 3.3 or 5V high level), generally do not use, to apply the need to add level conversion. SHDN - Sensor closing pin. By default, it is pulled high. There is a level conversion diode, so you can use 3-5V logic on this pin. When the pin is pulled down, the sensor enters the off mode.