Polymaker HT-PLA-GF Filament 1.75mm Grey, High Temp PLA for 3D Printing, Heat Resistant to 150°C, Easy to Print, Easy to Anneal, Works with Most FDM Printers, 1kg Spool

High Heat Stability - Withstands temperatures up to 150°C, making it suitable for hot environments like garages, car interiors, or sun-exposed surfaces. HT-PLA-GF resists warping or deformation - great for garden tools, garage organizers and vehicle-mounted parts. Effortless Printing - HT-PLA-GF prints with PLA-like ease while supporting speeds up to 350 mm/s. Delivers smooth extrusion, minimal clogging and excellent dimensional accuracy, making it a dependable choice for print farms and high-throughput production workflows. HT-PLA vs HT-PLA-GF - HT-PLA offers high heat resistance with the same strength as regular PLA, making it suitable for aesthetic or non-load-bearing prints. For added stiffness, strength, and annealability, HT-PLA-GF is the better choice for functional parts. Shipping & Storage Ready - Designed to retain form and print quality during long-haul shipping or extended storage. HT-PLA-GF resists heat-induced deformation, making it suitable for printed parts that need to be stored, transported or distributed without structural loss. Excellent Surface Finish - Achieve a textured, satin surface finish with minimal post-processing. HT-PLA-GF prints cleanly and consistently, making it suitable for parts where both function and appearance matter-such as garage brackets, outdoor enclosures or exposed utility prints. Spool Packaging & Feed - Each spool is made from rigid cardboard with reinforced edges for smooth feeding and minimal dust. Compatible with AMS, dry boxes and most spool holders; easy to store, easy to load - optimized for efficiency in organized print setups. Made for Makers & Engineers - Trusted by engineers, hobbyists and print farms alike, HT-PLA-GF delivers reliable results across production batches. Excellent for repeatable printing of strong parts like workbench tools, jigs, fixtures or machine-ready prototypes. Hardened Nozzle Recommended - HT-PLA-GF contains glass fibers and may wear standard brass nozzles over time. Use a hardened steel or ruby-tipped nozzle for optimal performance, consistent extrusion and to extend the life of your hotend components on extended jobs. Annealing for Performance - Unlock greater thermal performance by annealing prints at 100°C for 30 minutes. Annealing improves heat deflection and dimensional stability - suitable for parts used in warm environments or under repeated functional stress. Reinforced Functionality - HT-PLA-GF is reinforced with glass fiber for added stiffness and reliability. Suitable for tool mounts, mechanical brackets and functional enclosures where dimensional accuracy and heat resistance are critical to long-term performance.