Polymaker TPU Filament 1.75mm White, 750g Shore 90A Flexible, 1.75mm Diameter, 750g Display Weight, PolyFlex TPU90 3D TPU Filament

〰️ 【Easy to Print & UV Resistant TPU Filament】 - PolyFlex TPU90 is a flexible TPU filament 1.75 ( Thermoplastic Polyurethane filament ) with a shore hardness of 90A. It offers great flexibility without compromising on printing speed. It's is also UV resistant which can be used outdoors. Flexible filaments are known to be difficult to work with. Well not any more PolyFlex is designed to be compatible with almost all desktop FDM/FFF printers and requires no hardware modification 【Tangle Free & Moisture Free】 - Polymaker White TPU soft filament is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue 【Flexible & Strong & Consistent & Outstanding Layer Adhesion】 - Super easy to print with. Great flexibility and shape memory. Polymaker 3D filament TPU is strong yet flexible, which has tough rubbery consistency and outstanding layer adhesion, also Bubble-free, Jam Free & Warp Free, easily get really perfect prints with proper settings 【Wide Applications】 - PolyFlex TPU filament 1.75mm ( White flexible filament 1.75 )has wide applications including seals, plugs, gaskets, sheets, shoes, key ring case for mobile hands-bike parts shock and wear rubber seal (Wearable Device/Protective applications, such as shoe insoles, watch bands, phone cases, drone parts and more) ⚙️ 【PolyFlex TPU90 Printing Settings】 - Nozzle: 210˚C - 230˚C; Bed: 25˚C - 60˚C; Speed: 30mm/s - 60mm/s; Fan: On. Selected Diameter: 3D Printer filament flexible White TPU 1.75mm ( Elastic filament White TPU Roll ) ⚠️ 【Note】 - PolyFlex TPU Flexible filament 1.75mm should be printed at lower speed than normal. It's better to work on direct drive extruders. Please print slowly and read the tips if you are bowden. Turn off (or limit) retraction if possible. Turn up the bed temp to 80C or so for the first layers to get good adhesion ️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need