Power Feed Z-Axis for Milling Machine 450 in-lb Torque, 0-200RPM, 110V, Power Feed Milling Machine for Bridgeport and Some Knee Type Mills with a 5/8" Diameter Shaft on The End

Model Parameters: Model type: Z-Axis power feed, Power Parameter: 90Watt, 110V input voltage, 50/60Hz, single phase; Rotate Speed: 0-200 RPM. Max Torque: 450in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min. Ergonomical Design: This power feed for milling machine has the small size, size: 7*3.5*12.8 inch, weight: 8.27lbs. Easy to install, and ergonomically designed. Installed on the machine tool, it can provide stable power to the machine tool and improve work efficiency. Flexible Operation: You can set this power feed to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob to do more precise milling work.And this multifunctional milling machine power feed can work with excellent speed control in the entire range according to your needs. High Work Efficience: This power feed adopts high precise Gleason Spiral Bevel Gear with advantages of stable transmission ratio, high transmission efficiency and low transmission noise. If the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage. Wide Use: This power feed fits some milling machines like Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc. Fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Note: Please make sure yours is the typical Bridgeport type as mentioned above., Manufacturer: FAHKNS