Practical Delay Module With LCD Display For 5V 12V 24V Digital Timer Cycle Delay Control Switch Module AC 110V Timing Cycle Timer Control

For example: set T1=8.88, the controller counts down at 0.01s, T2=8.8.8, the controller counts down at 1 Working setting: 6 working modes for users to set. Long press the setting to enter the P-0 parameter, and set the required working by pressing the plus or minus on the current User's Guide: This product has 4 buttons, button plus, button minus, set button, stop or start button. There are two sets of time and T2 for users to set Time automatically the The default is seconds. Decrease the number to 0, continue to press the button to decrease, the will automatically to 99.9s; add the number to continue to press the button to increase, the will automatically to 0.0.0 Firstly set the time, T1=4.05 T2=0.1.0 Secondly set the working P-3, it will be automatically memorized 5s after setting, and start to run The number format is as follows: X.X X---time 0.01s; X X.X---time 0.1s; X X X---time 1s; X.X.X---time 1min