QED Performance XT25 Speaker Cable with X-Tube Technology - Pre-Terminated with Banana Plugs - (Pair) (3, 3, Metres)

Connect your Home cinema amplifier, AV Amplifier, Receiver To your Speakers. Pair of XT25 Speaker cables Pre-Terminated with Airloc Heat Shrink 4mm Banana Plugs X-Tube Technology....but with a twist --- In loudspeaker cables high pitched sounds are forced to travel towards the outside of the conductor and so are able to use less and less of the available cross-sectional area as the pitch increases. This is called the “Skin Effect”. The XT25 variation of QED X-Tube Technology solves these problems by creating a hollow tubular conductor geometry out of individual conductor bunches through which each frequency can pass with equal ease when compared to traditional solid or stranded conductors. Low-Loss Dielectric --- Music signals in a loudspeaker cable move back and forth many times every second. The insulating material used to separate the send and return conductors from each other (the dielectric) has to be charged and discharged every time. Not all of the energy stored in the dielectric during each charge cycle is completely returned during each discharge cycle which has a detrimental effect on the fidelity of the sound you hear. That’s why at QED we use low-loss dielectric materials such as Polyethylene (PE) or Teflon (PTFE) in preference to cheaper PVC alternatives found in inferior unbranded cables. Wire gauge - 14 AWG / Jacket outside diameter - 3.96 mm / Insulation - LDPE jacket with 100% coverage of Aluminium Mylar tape wrap