Rordigo 2.4G HiFi Wireless Audio Transmission Transceiver Supports One Transmitter and Multiple Receivers for Stereo Sound

The stereo audio signal input from the 3.5 mm stereo audio port at the transmitter end is first sampled and encoded by a 24-bit stereo audio ADC with a sampling rate of 48 kHz and then transmitted into space in the form of a digital signal via the ISM band radio signal with a carrier wave of 2.40 2-2.480 GHz. After receiving the signal, the receiver first checks and decodes the digital signal and then outputs it to the 24-bit audio DAC to restore an analog stereo audio signal with the same 48 kHz rate and output it to the 3.5-bit audio DAC mm stereo audio port. The wireless high-fidelity stereo audio transceiver is a wireless audio transceiver that integrates wireless transmission and reception of stereo audio. To solve the problem of multiple transmitters in the same signal coverage area simultaneously sending signals and different receivers receive the specified transmitter signal without confusion, this device uses an 8-bit address encoding to only distinguish when the receiver address encoding setting is set with the transmitter setting. Only connect if they are consistent, otherwise do not connect. This device uses a proprietary 2.4G wireless communication protocol and a codec algorithm, uses a broadcast transmission mode, and supports one send and multiple reception operations.