SparkFun Qwiic LED Stick APA102C - Features 10x addressable APA102 LEDs Add Full Color LED Control Using I2C Includes Two Qwiic connectors Solderless Board Simply Plug and go

The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Write to individual LEDs to display a count in binary, or write to the whole strip for cool lighting effects. The LED Stick has a default I2C address of 0x23 but can be changed with a simple command, allowing you to control up to 100 LEDs (10 Qwiic LED Sticks) on a single bus! The address can also be changed to 0x22 by closing the solder jumper on the back of the board This board is one of our many Qwiic compatible boards! Simply plug and go. No soldering, no figuring out which is SDA or SCL, and no voltage regulation or translation required! Warning: Using a lot of LEDs can draw a lot of current. Make sure to consider the power limits of your setup. If you expect your LED chain to draw more than 600mA of current, connect your external supply directly to VLED. Closing the jumper from VLED to VCC will add a 4.7uF decoupling capacitor. Features: 10x APA102C addressable LEDs driven by an ATTiny85; Default I2C Address: 0x23 (Adjustable to 0x22 via Jumper), 2x Qwiic Connectors. Note: LED strip only no cables or microcontroller included.