SpeedBox 3.3 B.Tuning Compatible with Giant E-bikes/Tuning Chip with Bluetooth for SyncDrive Pro Motors and RideControl Go 2022-2024 / SpeedBox App

Tuning chip to remove the speed limit on e-bikes. Compatible with motos: SyncDrive Pro 2 (85 Nm) and RideControl Go, SyncDrive Sport 2 (75 Nm) + RideControl Dash, SyncDrive Sport 3 (85 Nm), SyncDrive Sport 3x (100 Nm). You can set your own speed limit. You can pair with SpeedBox app. Activation/deactivation: In the mobile application SpeedBox App. Or by pressing the walk button, the e-bike display shows a value of 5.0 km/h (3.1 mph) - you can ride at speeds of up to 50 km/h or more. To minimize the risk of error codes, we recommend not to exceed 35 km/h. Disable tuning in the same way, and your display shows 2.5 km/h (1.6 mph). If your e-bike does not have a walk button, use the combination of - + - + + buttons to activate/disable the SpeedBox. Do not perform while driving. Leave the e-bike on after finishing the ride until the value 0.0 km/h is displayed. During this process, the remaining time is displayed. Do not remove the display to lock the e-bike until the SpeedBox has completed the "countdown" process. Do not perform a firmware update of your e-bike to avoid the risk of tuning detection. The warranty for SpeedBox products does not apply to malfunctions caused by an update of the engine. For short stops, leave one foot on the pedal so that the countdown does not begin and you can continue driving. For longer stops, allow at least part of the countdown. After a long journey, the countdown can take several minutes. Do not remove the display if the countdown is not complete. Before installing the SpeedBox into a new e-bike, ride at least 10 km with this e-bike. E-bikes equipped with SpeedBox must not be used on public roads, bike paths or public places. Detailed installation information can be found here: https://www.youtube.com/embed/uRzOhp0qzB0