SS8 M10 Flat Washers, DIN 125 Form A, White Zinc Plated Steel, Pack of 2 | 10.5mm Hole, 20mm Outer Diameter, 2.00mm Thick, ISO 7089 Equivalent, Metric

Spreads the load: the wide bearing face spreads the clamping force over a larger area for even load distribution, protecting the mating surface from marking, pull-through and stress concentration, and the fastener from damage due to pressure, vibration and friction. This listing: 2 M10 washers. Inner hole 10.5mm, outer diameter 20mm, nominal thickness 2.00mm (0.413in / 0.787in / 0.079in). Match the washer to the thread of your bolt or screw: an M10 washer for an M10 bolt. 17 sizes, M3 to M36, from 0.5mm (0.020in) to 5.0mm (0.197in) thick, in packs of 2, 10, 50, 100 or 200. Keeps the joint steady: under vibration and dynamic loads the washer helps keep the joint stable and reduces movement of the fastener. DIN 125 Form A dimensions (ISO 7089 equivalent): flat, without a chamfer, sits flush either way up. Anti-corrosion white zinc coating on steel, giving durable protection against surface rust and resistance to corrosion; a cost-effective everyday choice. Easy to fit with standard metric hexagon bolts, screws and nuts of the matching size. Typical uses: general engineering and machine assembly; automotive and workshop repairs; construction and structural fixings across timber, steel or masonry; electrical enclosures, cabinets and panel building (M3 to M6); furniture assembly, shelving and general joinery; DIY, maintenance and repairs around the home, garage and workshop.