TARION Camera Arm Desk Mount: Heavy Duty DSLR Desktop Mount Camera Stand with Tablet Holder Double C Clamp 1/4 3/8 Screw Adapter Articulating Arm for Selfie Streaming Videography TitanRig Lite Z

【VERSATILE COMPATIBILITY】The camera arm desk mount is equipped with 1/4" & 3/8" compatible dual-thread screws, and comes with an additional 1/4" to 3/8" dual-thread screw and an tablet clamp (14-27cm/ 5.5-10.63inch). This allows the overhead camera mount to accommodate DSLR camera, Ringlight, webcam, tablet, cell phone, microphone, and other devices. It supports a wide range of scenarios, including live streaming, online meeting, video shooting and online courses. 【FLEXIBLE & QUICK POSITIONING】With an articulating arm length of 48cm/18.9inch, the camera desk mount DSLR can be adjusted 360 degrees vertically and 180 degrees horizontally with just a flick of the knob. The attached ball head is also 360 degrees rotatable for precise adjustments. Additionally, you can freely position the vertical height (0-55.5cm/0-21.85inch) by moving the the extension arm on the main pole - also just flip the knob to release the positioning lock. 【Secure Double Clamp】Designed with dual clamps for enhanced stability compared to a single clamp. The C-shaped clamp base comes with anti-slip silicone pads, suitable for desktops with a thickness of 1.5-7.5cm/0.6-2.95inch. The overhead stand for camera has internal anti-slip rubber and is secured with knobs, ensuring excellent stability and minimizing camera shake during use. 【Robust & Durable】The main body of the heavy duty desk arm is made of rust resistant aluminum alloy, ensuring outstanding durability and reliability. With an overall weight of 3.15kg/7lb, the camera mount arm can bear a total weight of up to 8kg/17.6lb (in vertical orientation only). Load capacity is reduced in horizontal orientation. Overloading may cause the support arm to break and damage the device.ensuring the safety and stability of your equipment. 【PLUG AND PLAY】Fix the double C-shaped clamp and connect the two-section main pole, insert the extension arm from top to bottom, and then tighten positioning lock by flip the knob. The top of the main pole can be used to connect divices like fill lights using dual-thread screws The top of the main pole comes with a 3/8" & 1/4" dual-thread screw for additional loads of fill lights, ring lights, cameras and other equipment.