Unibond Sanitary Sealant Ready to Use and Waterproof Mould Resistant White Sealant Suitable for Bathrooms, Kitchens, Work Tops, and Tiling Joints, 274g Bulk Buy 12 Pack

MOULD RESISTANT: UniBond Sanitary Anti-Mould is a one-component, ready-to-use, silicone sealant for sealing joints in warm, humid environments where there is a likelihood of mould growing. It contains a fungicide and is suitable for use around baths, toilets, wash basins, showers, kitchens, worktops and tiling joints. SURFACE PREPARATION: All surfaces must be clean and dry, free from dust and grease or, anything which may be detrimental to the correct adhesion of the sealant. Residues of old sealant or other materials as well as mould on the substrate must be removed completely, we recommended silicone remover. SEALANT APPLICATION: The sealant should be applied to ensure that the seal is filled. Smoothing off the seal ensures good contact between the sealant and the bonding surfaces. Directly after application, smooth off with an UniBond Sealant Smoother Tool. CLEANING AND FINISHING: Fresh sealant may be cleaned with a cloth soaked in white spirit or alcohol (e.g., methylated spirit) Cured sealant can be removed by scraping (e. g. using a razor blade) or by using a special silicone remover product. DRYING TIME: The sealant will touch dry in 20 mins and fully dry in approximately 24 hours. To get the best sealing results it is recommended to mask off the edges of the joint with masking tape before applying the sealant. Remove any tape immediately, before the surface skin has formed on the sealant. Smooth over any proud sealant edges immediately.