VIOFO HK4 Acc Hardwire Kit, USB-C Hard Wire Kit for 229 Plus/Pro, WM1, T130, A119 mini 2, A329 Dash Cam, Low Voltage Protection for Parking Mode (Fuses need to be purchased additionally)

【24 Hours Parking Surveillance】When the engine is off, HK4 hardwire cable provides continuous power to the camera, any collisions, event will be recorded. 【Low Voltage Protection】HK4 hardwire lets you set a voltage cut-off value with 4 options, when the voltage of vehicle’s battery drops to the cut-off value, it will stop powering your dashcam, thus protecting your battery from discharge. 【Automatically switch parking mode】With ACC detection, the dash cam will switch to parking mode automatically if the vehicle engine is off. The dash cam will switch into normal recording when the vehicle engine is on. 【12 / 24V Compatible】HK4 ACC Hardwire cables connects the camera directly to the car, truck, bus, SUVs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12 - 24V. The hardwire cable length is 13.1ft (4m). The red battery cable should be connected to constant power. The ACC yellow cable should be connected to ignition. The Ground cable should be connected to vehicle body. NOTE: You need to prepare 2pcs fuse tap to work with the hardwire cable. HK4 hardwire cable is for VIOFO A329/A229 Ultra/A229Plus/A229Pro/A119Mini 2/A139Pro/WM1/T130 dash cam, ISN'T compatible with other series of our dash camera. Note: The installation of the harewire cable requires the connection of the circuit fuse taps. You can buy the appropriate fuse according to your vehicle model.