Wheels Manufacturing 6002, 6802 and 6902 Sealed Bearing Extractor (15

Genuine Wheels Manufacturing spare or a great tool on it's own To remove sealed bearings you will need the correct size extractor, 8mm & 10mm wrenches (for small sized extractors) or 13mm and 1 wrenches (for large sized extractors), hammer and punch The correct size extractor will fit snugly into the inner diameter (I.D.) of the sealed bearing you wish to extract Place extractor into I.D. of sealed bearing until it seats flush with the shoulder of the extractor Tighten nut with wrench while securing extractor with other wrench. Tighten nut until the extractor is firmly in place within the I. D. of the sealed bearing Once the extractor is secured, align a punch with back side of the extractor Gently tap on the punch until bearing is removed along with the extractor The bearing is now removed. Install new sealed bearings with a Wheels Mfg PRESS-1 (rear hub & bbs) or PRESS-2 (front hub)