Wire Shielding Tinned Copper Cable Sleeve Ground Straps EMI RFI ESD Protection Flat Braid Flexible Mesh (5/16 in Wide(0.20 in Dia)-15ft)

[FLEXIBLE and EXPANDABLE BRAID DESIGN]: 5/16"Wide,0.20"=3/16" Inner Diameter,15Feet Long,Suit for Cable Diameter from 5/32" to 9/32".Expandable and Flexible Cable Sleeves have great scalability that mean the more it expands, the more the strands separate which then you can see through to whatever you are protecting. Wire Shielding Braid Sleeve is excellent way to protect mechanical cables from damage and wear. 【EMI, RFI and ESD PROTECTION】: Wire shielding braid is used for shielding wire from EMI(Electromagnetic Interference)/RFI (radio frequency interference).Can also be ground staps,blocks electrical interference,shielding for signal wires,coax and audio cables,maintain signal stability and reduce signal noise,can also use for an rf ground.reduce hum in guitars,stop an electrical whine in car stereo. 【TINNED COPPER PREVENT RUST MATERIAL】: Tinned Copper braid ground straps are made of multiple 0.12 mm single bare copper tinned wires with fine weaving density,smooth surface without burrs and no truncation in the middle.Tin coated can provide high conductivity,strong fatigue resistance and prevent the copper from oxidizing which would produce copper rust,causing poor contact. 【HIGH CONDUCTIVITY】: Tinned Copper Braid Sleeves have efficient thermal transmission and high level of conductivity,can provide excellent current transmission Good Heat Dissipation,Low Heat,Avoid spark splashing caused by over current,standard resistivity,thick&sturdy means safe and reliable,Long service life. 【WIDE APPLICATION】: Flat Tinned Copper Braid has wide applicaion can be used for automotive and industrial,engine ground cables and common ground straps,earth straps,earthing cables and current transmission leads.Tubular Wire shilding is another use,shield wires from emi rfi esd emf interference.Can also be metal cable sleeve which is better than polyester in protecting wire from pet chewing.