WRX Trade Satinwood Paint For Wood - Quick Dry - Pure Acrylic - Water Based (2.5L, Black Ral 9011)

Water based - Pure Acrylic - Quick Dry - Durable - Semi Gloss Finish - Odorless - Non Yellowing - low VOC PREPARATION : The surfaces should be dry and free of any dirt, dust, oil, old paint residues and loose textures which cannot hold itself. It is recommended that wood stain be used on the raw surfaces to be painted for the first time. First, the surface should be sanded lightly and wiped with a damp cloth to remove any dust prior to painting. Best result can be achieved by applying the paint with a brush along the grain of the wood. All tools used should be cleaned with water. APPLICATION: Do not apply in damp or humid conditions or room temperatures below 10°C. Stir well before use. Ready to use. Mixing ratio for thinning is 5% maximum, if required. Suitable for application by brush or satin roller. For best results, load the brush generously. Apply paint evenly and avoid overspreading. 2 coats are recommended. Extra coats may be required if the colour change is strong. COVERAGE: WRX Door&Trim will cover approximately 14-18 square metres per litre depending on the surface. DRYING TIME: Touch dry in an hour under normal conditions. Allow 6 hours between coats. Through dry is 24 hours. VOC: EU limit value for this product (cat.A/d) : 130 g/l (2010). This products contains max 30 g/l VOC. VOCs. (Volatile Organic Compounds) contribute to atmospheric pollution., Manufacturer: Akcali