Wzxksoac GY500 Gyroscope Single- Lock Head Heading-Lock Gyro for RC Helicopter Model Car Direction Control

Reverse switch:Switch the control direction of the gyroscope. The correct switching should be made according to the direction of rotation of the main rotor of the helicopter and the direction of the tail rudder link. Control delay adjustment knob:Adjust the operating speed of the tail control signal. If you use a slower steering gear and find that the helicopter's tail rudder produce tracking, turn the knob clockwise to increase the delay time to the tracking phenomenon. If the tail rudder uses a high speed servo, such as a digital servo, adjust the knob to the 0 position. mode switch:Digital servo mode switch. When using the digital servo, please cut the mode switch to the ON position. When using the general servo, please cut it to the OFF position. If it is turned to the ON position, it may cause the servo to burn. (The output signal format is different) Using high- CNC processing shell, mini and Steering gear maximum stroke adjustment knob:Set the maximum stroke amount of the tail rudder servo. Fully steer the rudder stick to the left and right. Adjust the knob so that the stroke of the tail rudder does not exceed the maximum range of the tail pitch sleeve. Turn the knob clockwise to increase the stroke., Manufacturer: Wzxksoac