XGecu T76 Programmer 13 Adapters T56 TL866II Plus T48 Replacement ISP Chip PIC NAND Flash EMMC Bios AVR MCU SPI Nor Tester Clip Socket IC Reader Writer

Please note: before buying, make sure the chip models you want to program are in the support list. Please contact us for checking.T56 programmer is stop produced.T76 is the updated version. Programmer Support : Windows XP,2003,2008,Vista Win7 WIN8 WIN10 WIN11 T76 features: high-performance 32-bit RISC-V MCU + FPGA controller, paired with a high-speed USB 3.0 Type-C interface. This configuration provides data transfer speeds up to 140MB/sec (EMMC 5.1 actual transfer rate), multiple times faster than traditional programmers! Whether you are reading or writing data, you will experience lightning-fast operation. EMMC 5.1 actual transfer rate up to 140MB/sec (8.4GB/minute).SPI NAND read speed up to 18MB/s.64 Gb P-NAND read speed of 30MB/S. T76 supports:26, 27, 28, 29, 37, 39, 49, 50 series parallel ROM, EPROM, EEPROM;24, 25, 35, 45, 85, 93, 95 series serial EEPROM; P-NAND FLASH, customizable to add new chip models;SPI NAND (SD NAND/SD cards); EMMC/EMCP;microcontroller series programming;GAL/CPLD programmable logic device programming;VGA tool and VGA ISP programming;SRAM chip testing;High-performance 54/74F/LS/HC CMOS4000 series IC logic test. common EEPROM, EPROM, FLASH chips,support robust microcontroller and programmable logic device (GAL/CPLD) and with the capability to customize and add new chip models. the chip models will be updated normally in the future. Adapter Quality: Most of our adapters are use gold-plated pin header,Better contact between the adapter and the programmer: The adapter uses high-quality spring-loaded sockets, which have strong resilience, can better read and write chips and have a long service life. Package include:1*T76,USB cable*1, SOP8 clip*1, 1SOP28-DIP28*1 TSSOP28-DIP28*1, SOP8 150mil*1, SOP8 208mil*1, SOP20*1, SOP16 150mil*1, PLCC44*1, PLCC32*1, PLCC28*1, PLCC20*1, Sop8/SOP16*1, qfp32-100*1, TSOP48*1,extractor*1