Zooz 700 Series Z-Wave Plus Mesh Network Scene Controller ZEN32, White | Z-Wave Hub Required

Main button: connect a 120V light fixture (up to 150W for LEDs) to control it via Z-Wave or use the main button for wireless control only with up to 7 available trigger buttons. Z-Wave hub required, sold separately. Note: Your smart speaker is not a Z-Wave hub. 4 Remote Buttons - Program each button to activate scenes or other devices in your network to control your favorite smart lighting presets. Use the buttons to enter "Away" mode when going out or to turn off all lights before going to bed with one click. Direct 3-way solution: no additional switch is required. Works with regular 3-way switches as long as neutral is present. Wire it like ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and reconnect the two boxes exactly as shown. Also works great as a single-pole switch Z-Wave Hub Compatibility: Most basic Z-Wave systems are not advanced enough to allow stage control programming. The ZEN32 Stage Controller is supported by: SmartThings (with a custom manager, instructions included with the product), Hubitat, Home Assistant and HomeSeer. Please do not purchase this device if your hub is not listed here, it will not be recognized correctly by your system. NEW 700 SERIES - This product is built on the latest Z-Wave chip in the 700 series for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing. Easy installation: clear diagrams and support 7 days a week included. No side tabs and only 2.8cm deep to fit shallow, crowded cases. Neutral wire required (check before buying) The device is ETL certified and meets North American safety standards. Backed by a 5 year warranty.