Ronseal Diamond Hard Floor Paint 5L, Slate

Ronseal Diamond Hard Floor Paint is tough, protecting from knocks, scuffs, scrapes and spills. Use it on wood, concrete and stone floors. This product covers 12 m²/litre, needs 3 coats, can be applied with a brush, is dry to touch in 4 hours and if needed can be recoated in 4 hours. When preparing concrete and stone floors, if they're bare make sure newly laid concrete has been left out to dry for a month before painting it. Wire brush the floor and remove any dust. Concrete floors can react with the paint and cause it to crack and blister so seal the floor with a stabilizing solution. Or it can be diluted with 10% water, then put onto the floor with a brush or roller. Leave to dry before painting over. For previously painted concrete, wire brush the floor, then wipe with white spirit and leave to dry before painting. When preparing wooden floors when bare, start by sanding the floor, this will give the wood an even finish. The easiest way to do this is with a floor sander. Use 120 gri